Switch Provision (Stack) - Centrecom FS980M/9 Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING
( )
SWITCH PROVISION STACK

switch provision (stack)

Overview This command enables you to provide the configuration for a new stack member
switch prior to physically connecting it to the stack. To run this command, the stack
position must be vacant. The selected hardware type must be compatible existing
stack hardware.
Use the no variant of this command to remove an existing switch provision.
switch <stack-ID> provision {fs980-28|fs980-52}
Syntax
switch <stack-ID> provision {gs900-24|gs900-48}
no switch <stack-ID> provision
Mode Global Configuration
Usage Note that although the syntax appears to enable provisioning on up to 8 stackable
switches, in practice a maximum of 2 are configurable. Normally the stack
members would be numbered 1 and 2, and so the command could be run to
provision any stack member within this range; and we advise using this procedure.
In effect, the syntax then becomes:
However, you could number the stack units with any numbers between 1 and 8.
For example you could number your two stack members 3 and 7. In this case you
could provision either of the stack members by using one of these numbers. We
advise against numbering your stacks in this way.
Examples To provision an FS980M/28 switch as stack member 2, use the following
commands:
awplus#
awplus(config)#
To remove the provision of the FS980M/28 switch as stack member 2, use the
following commands:
awplus#
awplus(config)#
613-50137-01 Rev A
™) C
TACK OMMANDS
Parameter Description
provision
Provides settings within the stack configuration ready for a
specific switch type to become a stack member.
fs980-28
Provision a 28-port FS980M Series switch.
fs980-52
Provision a 52-port FS980M Series switch.
gs900-24
Provision a 24-port GS900MX/MPX Series switch.
gs900-48
Provision a 48-port GS900MX/MPX Series switch.
configure terminal
switch 2 provision fs980-28
configure terminal
no switch 2 provision
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1247