Show Debugging Arp Security - Centrecom FS980M/9 Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW DEBUGGING ARP SECURITY

show debugging arp security
Overview Use this command to display the ARP security debugging configuration.
show debugging arp security
Syntax
Mode User and Privileged Exec
Example To display the debugging settings for ARP security on the switch, use the
command:
awplus#
Table 8: Example output from the show debugging arp security command
Related arp security violation
Commands
debug arp security
613-50137-01 Rev A
show debugging arp security
awplus# show debugging arp security

ARP Security debugging status:
ARP Security debugging is off
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1194