Snmp-Server Contact - Centrecom FS980M/9 Command Reference Manual

SNMP C
OMMANDS
-
SNMP SERVER CONTACT

snmp-server contact

Overview This command sets the contact information for the system. The contact name is:
•
•
The no variant of this command removes the contact information from the system.
snmp-server contact <contact-info>
Syntax
no snmp-server contact
Mode Global Configuration
Example To set the system contact information to "support@alliedtelesis.co.nz", use the
command:
awplus#
awplus(config)#
support@alliedtelesis.co.nz
Related show system
Commands
snmp-server location
snmp-server group
613-50137-01 Rev A
displayed in the output of the
stored in the MIB object sysContact
Parameter Description
<contact-info> The contact information for the system, from 0 to 255 characters
long. Valid characters are any printable character and spaces.
configure terminal
snmp-server contact
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
show system command
1495