Snmp-Server Engineid Local Reset - Centrecom FS980M/9 Command Reference Manual

SNMP C
OMMANDS
- ID
SNMP SERVER ENGINE LOCAL RESET

snmp-server engineID local reset

Overview Use this command to force the device to generate a new pseudo-random SNMPv3
engine ID by resetting the SNMPv3 engine. If the current engine ID is user defined,
use the
generated value.
snmp-server engineID local reset
Syntax
Mode Global Configuration
Example To force the SNMPv3 engine ID to be reset to a system generated value, use the
commands:
awplus#
awplus(config)#
Validation show snmp-server
Commands
Related snmp-server engineID local
Commands
613-50137-01 Rev A
snmp-server engineID local
configure terminal
snmp-server engineID local reset
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
command to set SNMPv3 engine ID to a system
1500