Advertisement
DHCP S
C
NOOPING
OMMANDS
SHOW IP SOURCE BINDING
show ip source binding
Overview
Use this command to display static entries in the DHCP snooping database. These
are the entries that have been added by using the
show ip source binding
Syntax
Mode
User Exec and Privileged Exec
Example
To display static entries in the DHCP snooping database information, use the
command:
awplus#
Table 21: Example output from the show ip source binding command
Table 22: Parameters in the output from the show ip source binding command
Related
ip source binding
Commands
show ip dhcp snooping binding
613-50137-01 Rev A
show ip source binding
awplus# show ip source binding
IP Source Bindings:
Client
MAC
IP Address
Address
----------------------------------------------------------------
1.1.1.1
0000.1111.2222
Parameter
Client IP
Address
MAC Address
VLAN
Port
Expires (sec)
Type
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
VLAN
Port
1
port1.0.1
Description
The IP address of the DHCP client.
The MAC address of the DHCP client.
The VLAN ID the packet is received on.
The Layer 2 port name the packet is received on.
Always infinite for static bindings, or when the leave time in
the DHCP message was 0xffffffff (infinite).
DHCP Snooping binding type: Static
ip source binding
command.
Expires
(sec)
Type
Infinite
Static
1209
Advertisement
Troubleshooting
