Show Rmon Statistics - Centrecom FS980M/9 Command Reference Manual

RMON C
OMMANDS

SHOW RMON STATISTICS

show rmon statistics
Overview Use this command to display the current values of the statistics for all the RMON
statistics collections currently defined on the device.
NOTE
Syntax show rmon statistics
Mode User Exec and Privileged Exec
Example To display the current values of the statistics for all the RMON statistics collections,
us the commands:
awplus#
Output Figure 44-3: Example output from the show rmon statistics command
awplus#show rmon statistics
rmon collection index 45
stats->ifindex = 4501
input packets 1279340, bytes 85858960, dropped 00, multicast packets 1272100
output packets 7306090, bytes 268724, multicast packets 7305660 broadcast 
packets 290
rmon collection index 679
stats->ifindex = 5013
input packets 00, bytes 00, dropped 00, multicast packets 00
output packets 8554550, bytes 26777324, multicast packets 8546690 broadcast 
packets 7720
NOTE
interfaces:
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A
: Only statistics for switch port interfaces, not for VLAN interfaces, can be shown.
show rmon statistics
: The following etherStats counters are not currently available for Layer 3
etherStatsBroadcastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1593