Advertisement
AAA C
OMMANDS
LOGIN AUTHENTICATION
login authentication
Overview
Use this command to apply an AAA server for authenticating user login attempts
from a console or remote logins on these console or VTY lines. The authentication
method list must be specified by the aaa authentication login command. If the
method list has not been configured by the aaa authentication login command,
login authentication will fail on these lines.
Use the no variant of this command to reset AAA Authentication configuration to
use the default method list for login authentication on these console or VTY lines.
login authentication {default|<list-name>}
Command
Syntax
no login authentication
Default
The default login authentication method list, as specified by the
authentication login
been specified, the default is to use the local user database.
Mode
Line Configuration
Examples
To reset user authentication configuration on all VTY lines, use the following
commands:
awplus#
awplus(config)#
awplus(config-line)#
Related
aaa authentication login
Commands
line
613-50137-01 Rev A
Parameter
default
<list-name>
command, is used to authenticate user login. If this has not
configure terminal
line vty 0 32
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The default authentication method list. If the default method
list has not been configured by the
command, the local user database is used for user login
authentication.
Named authentication server.
no login authentication
aaa authentication login
aaa
1087
Advertisement
Troubleshooting
