Type Stack Master-Fail - Centrecom FS980M/9 Command Reference Manual

T C
RIGGER OMMANDS
-
TYPE STACK MASTER FAIL

type stack master-fail

Overview This command (configured to the stack) initiates the action of a pre-configured
trigger to occur when the stack enters the fail-over state.
type stack master-fail
Syntax
Mode Trigger Configuration
To configure trigger 86 to activate when stack master fail-over event occurs, use
Example
the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related stack disabled-master-monitoring
Commands
trigger
type stack disabled-master
type stack member
type stack link
613-50137-01 Rev A
configure terminal
trigger 86
type stack master-fail
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1677