Debug Radius - Centrecom FS980M/9 Command Reference Manual

RADIUS C
OMMANDS

DEBUG RADIUS

debug radius
Overview This command enables RADIUS debugging. If no option is specified, all debugging
options are enabled.
Use the no variant of this command to disable RADIUS debugging. If no option is
specified, all debugging options are disabled.
Syntax debug radius [packet|event|all]
no debug radius [packet|event|all]
Default RADIUS debugging is disabled by default.
Mode Privileged Exec
Examples To enable debugging for RADIUS packets, use the command:
awplus#
To enable debugging for RADIUS events, use the command:
awplus#
To disable debugging for RADIUS packets, use the command:
awplus#
To disable debugging for RADIUS events, use the command:
awplus#
Related show debugging radius
Commands
undebug radius
613-50137-01 Rev A
Parameter Description
packet
Debugging for RADIUS packets is enabled or disabled.
event
Debugging for RADIUS events is enabled or disabled.
all
Enable or disable all debugging options.
debug radius packet
debug radius event
no debug radius packet
no debug radius event
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1103