Chapter 28: 802.1X Commands - Centrecom FS980M/9 Command Reference Manual

28
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
802.1X port access control. For more information, see the
Authentication Feature Overview and Configuration Guide
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A
802.1X Commands
"debug dot1x" on page 906
"dot1x control-direction" on page 907
"dot1x eap" on page 909
"dot1x eapol-version" on page 910
"dot1x initialize interface" on page 912
"dot1x initialize supplicant" on page 913
"dot1x keytransmit" on page 914
"dot1x max-auth-fail" on page 915
"dot1x max-reauth-req" on page 917
"dot1x port-control" on page 919
"dot1x timeout tx-period" on page 921
"show debugging dot1x" on page 923
"show dot1x" on page 924
"show dot1x diagnostics" on page 927
"show dot1x interface" on page 929
"show dot1x sessionstatistics" on page 934
"show dot1x statistics
"show dot1x supplicant" on page 936
"show dot1x supplicant
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
interface" on page 935
interface" on page 938
AAA and Port
904