Show Arp Security Interface - Centrecom FS980M/9 Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW ARP SECURITY INTERFACE

show arp security interface
Overview Use this command to display ARP security configuration for the specified ports or
all ports.
show arp security interface [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display ARP security configuration for ports, use the command:
awplus#
Table 3: Example output from the show arp security interface command
Table 4: Parameters in the output from the show arp security interface
613-50137-01 Rev A
Parameter Description
<port-list>
The ports to display ARP security information about. The port list can
include switch ports, and static or dynamic aggregated links.
show arp security interface
awplus#show arp security interface 

Arp Security Port Status and Configuration:

Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
KEY: LG = Log
TR = Trap
LD = Link down

Port Action
-------------------------------
port1.0.1 -- -- --
port1.0.2 -- -- --
port1.0.3 LG TR LD
port1.0.4 LG -- --
port1.0.5 LG -- --
port1.0.6 LG TR --
command
Parameter Description
Action
The action the switch takes when it detects an ARP security violation
on the port.
Port
The port. Parentheses indicate that ports are configured for
provisioning.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1190