Advertisement
A
C
UTHENTICATION
OMMANDS
-
-
-
AUTH
WEB
SERVER SESSION
KEEP
auth-web-server session-keep
Overview
This command enables the session-keep feature to jump to the original URL after
being authorized by Web-Authentication.
Use the no variant of this command to disable the session keep feature.
Syntax
auth-web-server session-keep
no auth-web-server session-keep
Default
The session-keep feature is disabled by default.
Mode
Global Configuration
Usage
This function doesn't ensure to keep session information in all cases.
Authenticated supplicant may be redirected to unexpected page when
session-keep is enabled. This issue occurred by supplicant sending HTTP packets
automatically after authentication page is displayed and the URL is written.
Examples
To enable the session-keep feature, use the following commands:
awplus#
awplus(config)#
To disable the session-keep feature, use the following commands:
awplus#
awplus(config)#
Validation
show auth
Commands
show auth-web-server
show running-config
613-50137-01 Rev A
configure terminal
auth-web-server session-keep
configure terminal
no auth-web-server session-keep
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1023
Advertisement
Troubleshooting
