Tacacs-Server Timeout - Centrecom FS980M/9 Command Reference Manual

TACACS+ C
OMMANDS
-
TACACS SERVER TIMEOUT

tacacs-server timeout

Overview Use this command to specify the TACACS+ global timeout value. The timeout
value is how long the device waits for a reply to a TACACS+ request before
considering the server to be dead.
Note that this command configures the timeout parameter for TACACS+ servers
globally.
The no variant of this command resets the transmit timeout to the default (5
seconds).
tacacs-server timeout <seconds>
Syntax
no tacacs-server timeout
Default The default timeout value is 5 seconds.
Mode Global Configuration
Examples To set the timeout value to 3 seconds, use the following commands:
awplus#
awplus(config)#
To reset the timeout period for TACACS+ servers to the default, use the following
commands:
awplus#
awplus(config)#
Related tacacs-server host
Commands
show tacacs+
613-50137-01 Rev A
Parameter Description
<seconds>
TACACS+ server timeout in seconds, in the range 1 to 1000.
configure terminal
tacacs-server timeout 3
configure terminal
no tacacs-server timeout
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1160