Download Print this page

Lldp Timer - Centrecom FS980M/9 Command Reference Manual

Fs980m series fast ethernet managed access switches reference for alliedware plus version 5.4.6-2.x

Advertisement

LLDP C
OMMANDS

LLDP TIMER

lldp timer
Overview
This command sets the value of the transmit interval. This is the interval between
regular transmissions of LLDP advertisements.
The no variant of this command sets the transmit interval back to its default.
Syntax
lldp timer <5-32768>
no lldp timer
Default
The default transmit interval is 30 seconds.
Mode
Global Configuration
Examples
To set the transmit interval to 90 seconds, use the commands:
awplus#
awplus(config)#
To set the transmit interval back to its default, use the commands:
awplus#
awplus(config)#
Related
lldp tx-delay
Commands
show lldp
613-50137-01 Rev A
Parameter
Description
<5-32768>
The transmit interval in seconds. The transmit interval must be at
least four times the transmission delay timer
command).
configure terminal
lldp timer 90
configure terminal
no lldp timer
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
(lldp tx-delay
1533

Advertisement

loading