Show Atmf Links Detail - Centrecom FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF LINKS DETAIL

show atmf links detail
Overview This command displays detailed information on all the links configured in the AMF
network. It can only be run on AMF master and controller nodes.
show atmf links detail
Syntax
Mode User Exec
Example To display the AMF link details use this command:
device1#
The output from this command will display all the internal data held for AMF links.
The following example gives details of the links that are summarized in the
example in
Table 46: Sample output from the show atmf links detail command
device1# show atmf links detail

--------------------------------------------------------------------------------
Crosslink Ports Information
--------------------------------------------------------------------------------
Port
Ifindex
Port Status
Port State
Last event
Port BPDU Receive Count
Port
Ifindex
Port Status
Port State
Last event
Port BPDU Receive Count
Adjacent Node Name
Adjacent Ifindex
Adjacent MAC
Port Last Message Response
613-50137-01 Rev A
™ (AMF) C
RAMEWORK OMMANDS
Parameter
detail
show atmf links detail
show atmf links.
: sa1
: 4501
: Down
: Init
: 
: 0
: po10
: 4610
: Up
: Full
: AdjNodeLSEPresent
: 140
: Building-B
: 4610
: eccd.6dd1.64d0
: 0
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Detailed AMF links information.
1402