Chapter 47: Ping-Polling Commands - Centrecom FS980M/9 Command Reference Manual

47
Introduction
This chapter provides an alphabetical reference for commands used to configure
Ping Polling. For more information, see the
Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Table 47-1: The following table lists the default values when configuring a ping
Command List •
•
•
•
613-50137-01 Rev A
Guide.
poll
Default
Critical-interval
Description
Fail-count
Length
Normal-interval
Sample-size
Source-ip
Time-out
Up-count
"active (ping-polling)" on page 1684
"clear ping-poll" on page 1685
"critical-interval" on page 1686
"debug ping-poll" on page 1687
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Ping-Polling
Commands
Ping Polling Feature Overview and
Value
1 second
No description
5
32 bytes
30 seconds
5
The IP address of the interface from which the ping packets are
transmitted
1 second
30
"Getting Started
Guide.
1682