Aaa Authentication Dot1X - Centrecom FS980M/9 Command Reference Manual

AAA C
OMMANDS
1
AAA AUTHENTICATION DOT X

aaa authentication dot1x

Overview This command enables IEEE 802.1X-based authentication globally and allows you
to enable an authentication method list (in this case, a list of RADIUS servers). It is
automatically applied to every interface running IEEE 802.1X-based
authentication.
Use the no variant of this command to disable 802.1X-based authentication
globally.
aaa authentication dot1x default group {<group-name>|radius}
Syntax
no aaa authentication dot1x default
Default 802.1X-based Port Authentication is disabled by default.
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages are sent:
•
•
Examples To enable 802.1X-based authentication globally with all RADIUS servers, and use
all available RADIUS servers, use the command:
awplus#
awplus(config)#
To disable 802.1X-based authentication, use the command:
awplus#
awplus(config)#
Related aaa accounting dot1x
Commands
aaa group server
dot1x port-control
radius-server host
613-50137-01 Rev A
Parameter Description
default
Configure the default authentication method list
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius: use all RADIUS servers configured by
command
group <group-name>: use the specified RADIUS server group configured
with the aaa group server
configure terminal
aaa authentication dot1x default group radius
configure terminal
no aaa authentication dot1x default
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
command
radius-server host
1068