Auth-Web-Server Page Welcome-Message - Centrecom FS980M/9 Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER PAGE WELCOME

auth-web-server page welcome-message

Overview This command sets the welcome message on the web-authentication login page.
Use the no variant of this command to remove the welcome message.
Note that if you need to customize the login page extensively, you can instead
replace it with your own page. See "Customising the Login Page" in the
Port Authentication Feature Overview and Configuration
auth-web-server page welcome-message text <welcome-message>
Syntax
no auth-web-server page welcome-message
Default No welcome message is set by default.
Mode Global Configuration
Examples To set the welcome message on the web-authentication page, use the commands:
awplus#
awplus(config)#
welcome message
To remove the welcome message on the web-authentication page, use the
commands:
awplus#
awplus(config)#
Validation show auth-web-server page
Commands
613-50137-01 Rev A
-
MESSAGE
Parameter
<welcome-message>
configure terminal
auth-web-server page welcome-message text Your
configure terminal
no auth-web-server page welcome-message
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Text string of the welcome message
AAA and
Guide.
1014