Radius Commands - Centrecom FS980M/9 Command Reference Manual

31
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use RADIUS servers.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A

RADIUS Commands

"auth radius send nas-identifier" on page 1100
"auth radius send service-type" on page 1101
"deadtime (RADIUS server
"debug radius" on page 1103
"ip radius source-interface" on page 1104
"radius-server deadtime" on page 1105
"radius-server host" on page 1106
"radius-server key" on page 1109
"radius-server retransmit" on page 1110
"radius-server timeout" on page 1112
"server (Server Group)" on page 1114
"show debugging radius" on page 1116
"show radius" on page 1117
"show radius statistics" on page 1120
"undebug radius" on page 1121
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
group)" on page 1102
1099