Auth-Web-Server Port - Centrecom FS980M/9 Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER PORT

auth-web-server port

Overview This command sets the HTTP port number for the Web-Authentication server.
Use the no variant of this command to reset the HTTP port number to the default
(80).
Syntax auth-web-server port <port-number>
no auth-web-server port
Default The Web-Authentication server HTTP port number is set to 80 by default.
Mode Global Configuration
To set the HTTP port number 8080 for the Web-Authentication server, use the
Examples
following commands:
awplus#
awplus(config)#
To reset to the default HTTP port number 80 for the Web-Authentication server,
use the following commands:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
613-50137-01 Rev A
Parameter Description
<port-number>
Set the local Web-Authentication server port within the TCP
port number range 1 to 65535.
configure terminal
auth-web-server port 8080
configure terminal
no auth-web-server port
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1020