A
T
M
F
LLIED
ELESIS
ANAGEMENT
SHOW DEBUGGING ATMF PACKET
show debugging atmf packet
Overview
This command shows details of AMF Packet debug command settings.
show debugging atmf packet
Syntax
Mode
User Exec and Global Configuration
Example
To display the AMF packet debugging status, use the command:
node_1#
Figure 38-19: Sample output from the show debugging atmf packet command.
Table 38-2:
Related
debug atmf
Commands
debug atmf packet
613-50137-01 Rev A
™ (AMF) C
RAMEWORK
OMMANDS
show debug atmf packet
ATMF packet debugging is on
=== ATMF Packet Debugging Parameters===
Node Name: x908
Port name: port1.1.1
Limit: 500 packets
Direction: TX
Info Level: Level 2
Packet Type Bitmap:
2. Crosslink Hello BPDU pkt with downlink domain info
3. Crosslink Hello BPDU pkt with uplink info
4. Down and up link Hello BPDU pkts
6. Stack hello unicast pkts
8. DBE request
9. DBE update
10. DBE bitmap update
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1428