Advertisement
RADIUS C
OMMANDS
SHOW DEBUGGING RADIUS
show debugging radius
Overview
This command displays the current debugging status for the RADIUS servers.
show debugging radius
Syntax
Mode
User Exec and Privileged Exec
Example
To display the current debugging status of RADIUS servers, use the command:
awplus#
Output
Figure 31-1: Example output from the show debugging radius command
613-50137-01 Rev A
show debugging radius
RADIUS debugging status:
RADIUS event debugging is off
RADIUS packet debugging is off
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1116
Advertisement
Troubleshooting
