Show Ipv6 Mld Snooping Mrouter - Centrecom FS980M/9 Command Reference Manual

MLD S C
NOOPING OMMANDS
6
SHOW IPV MLD SNOOPING MROUTER

show ipv6 mld snooping mrouter

Overview Use this command to display the multicast router interfaces, both configured and
learned, in a VLAN. If you do not specify a VLAN interface then all the VLAN
interfaces are displayed.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 mld snooping mrouter [<interface>]
Syntax
Mode User Exec and Privileged Exec
The following command displays the multicast router interfaces in vlan2:
Examples
awplus#
Output
The following command displays the multicast router interfaces for all VLAN
interfaces:
awplus#
Output
613-50137-01 Rev A
Parameter Description
<interface>
Optional. Specify the name of the VLAN interface. Note: If you do not
specify a single VLAN interface, then all VLAN interfaces are shown.
show ipv6 mld snooping mrouter vlan2

awplus#show ipv6 mld snooping mrouter vlan2
VLAN Interface
2 port1.0.2
2 port1.0.3
show ipv6 mld snooping mrouter

awplus#show ipv6 mld snooping mrouter
VLAN Interface
2 port1.0.2
2 port1.0.3
3 port1.0.4
3 port1.0.5
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Static/Dynamic
Dynamically Learned
Dynamically Learned
Static/Dynamic
Dynamically Learned
Dynamically Learned
Statically Assigned
Statically Assigned
"Getting Started
Guide.
753