Ssh Server Sftp - Centrecom FS980M/9 Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS

SSH SERVER SFTP

ssh server sftp
Overview This command enables the Secure FTP (SFTP) service on the SSH server. Once
enabled, the server accepts SFTP requests from remote clients.
You must enable the SSH server as well as this service before the device accepts
SFTP connections. The SFTP service is enabled by default as soon as the SSH server
is enabled. If the SSH server is disabled, SFTP service is unavailable.
The no variant of this command disables SFTP service on the SSH server. Once
disabled, SFTP requests from remote clients are rejected.
ssh server sftp
Syntax
no ssh server sftp
Mode Global Configuration
Examples To enable the SFTP service, use the commands:
awplus#
awplus(config)#
To disable the SFTP service, use the commands:
awplus#
awplus(config)#
Related show running-config ssh
Commands
show ssh server
613-50137-01 Rev A
configure terminal
ssh server sftp
configure terminal
no ssh server sftp
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1640