Master Failover - Centrecom FS980M/9 Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING
SHOW COUNTER STACK
Table 1: Parameters in the output of the show counter stack command (cont.)
613-50137-01 Rev A
™) C
TACK OMMANDS
Parameters
ID conflict
Master conflict

Master failover

Master elected
Master
discovered
SW autoupgrades
Stack port
Link up
Link down
Nbr re-init
Nbr
incompatible
Nbr 2way comms
Nbr full comms
Topology message counters
Total
Hellos
Topology DB
Topology update
Link event
Reinitialise
1-hop transport
Layer-2
transport
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Number of times that stack-ID conflicts.
Number of times that stack master conflict occurs.
Number of times that stack master fails.
Number of times that stack master is elected.
Number of times that stack master is discovered.
Number of times that the software in the stack members are
auto upgraded.
Number of times that this unit's physical stack link has come
up.
Number of times that this unit's physical stack link has come
down.
Number of times that the neighbor is detected as having
reinitialized.
Number of times that the neighbor is detected as
incompatible.
Number of times that the neighbor is in two way
communication status.
Number of times that the neighbor is in full communication
status.
Total number of topology messages.
Number of hello messages.
Number of topology database messages.
Number of topology database update messages.
Number of link event messages.
Number of reinitialize messages.
Number of 1-hop transport messages.
Number of layer 2 transport messages.
1220