RADIUS C
OMMANDS
SHOW RADIUS
show radius
Overview
This command displays the current RADIUS server configuration and status.
show radius
Syntax
Mode
User Exec and Privileged Exec
Example
To display the current status of RADIUS servers, use the command:
awplus#
Output
Figure 31-2: Example output from the show radius command showing RADIUS
Example
See the sample output below showing RADIUS client status and RADIUS
configuration:
awplus#
613-50137-01 Rev A
show radius
servers
RADIUS Global Configuration
Source Interface : not configured
Secret Key : secret
Timeout : 5 sec
Retransmit Count : 3
Deadtime : 20 min
Server Host : 192.168.1.10
Authentication Port : 1812
Accounting Port : 1813
Secret Key : secret
Timeout : 3 sec
Retransmit Count : 2
Server Host : 192.168.1.11
Authentication Port : 1812
Accounting Port : not configured
Server Name/
Auth
IP Address
Port
------------------------------------------------------------
192.168.1.10
1812
192.168.1.11
1812
show radius
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Acct
Auth
Acct
Port
Status
Status
1813
Alive
Alive
N/A
Alive
N/A
1117