Show Atmf Area Summary - Centrecom FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF AREA SUMMARY

show atmf area summary
Overview Use this command to display a summary of IPv6 addresses used by AMF, for one or
all of the areas controlled by an AMF controller.
show atmf area summary [<area-name>]
Syntax
Mode Privileged Exec
Example 1 To show a summary of IPv6 addresses used by AMF, for all of the areas controlled
by controller-1, use the command:
controller-1#
The following figure shows example output from running this command.
Table 15: Output from the show atmf area summary command
controller-1#show atmf area summary

ATMF Area Summary Information: 

Management Information 
Local IPv6 Address

Area Information 
Area Name
Area ID
Area Master IPv6 Address

Area Name
Area ID
Area Master IPv6 Address

Area Name
Area ID
Area Master IPv6 Address

Area Name
Area ID
Area Master IPv6 Address
Interface
Related show atmf area
Commands
show atmf area nodes
show atmf area nodes-detail
613-50137-01 Rev A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<area-name>
Displays information for the specified area only.
show atmf area summary
: fd00:4154:4d46:1::15 
: NZ (Local) 
: 1 
: - 
: Wellington 
: 2 
: fd00:4154:4d46:2::149 
: Canterbury 
: 3 
: fd00:4154:4d46:3::f 
: Auckland 
: 100 
: fd00:4154:4d46:64::17 
: vlink2000
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1383