Show Arp Security - Centrecom FS980M/9 Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW ARP SECURITY

show arp security
Overview Use this command to display ARP security configuration.
show arp security
Syntax
Mode User Exec and Privileged Exec
Example To display ARP security configuration on the switch use the command:
awplus#
Table 1: Example output from the show arp security command
Table 2: Parameters in the output from the show arp security command
Related arp security
Commands
show arp security interface
show arp security statistics
613-50137-01 Rev A
show arp security
awplus# show arp security

ARP Security Information:
Total VLANs enabled ............. 2
Total VLANs disabled ............ 11
vlan1 .............. Disabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan102 ............ Disabled
vlan103 ............ Disabled
vlan104 ............ Disabled
vlan105 ............ Enabled
vlan1000 ........... Disabled
vlan1001 ........... Enabled
Parameter
Total VLANs enabled
Total VLANs disabled
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The number of VLANs that have ARP security enabled.
The number of VLANs that have ARP security disabled.
1189