Advertisement
LLDP C
OMMANDS
SHOW LLDP INTERFACE
show lldp interface
Overview
This command displays LLDP configuration settings for specified ports. If no port
list is specified, LLDP configuration for all ports is displayed.
show lldp interface [<port-list>]
Syntax
Mode
User Exec and Privileged Exec
Examples
To display LLDP configuration settings for ports 1.0.1 to 1.0.6, use the command:
awplus#
To display LLDP configuration settings for all ports, use the command:
awplus#
Output
Figure 42-2: Example output from the show lldp interface command
awplus# show lldp interface port1.0.1-1.0.6
LLDP Port Status and Configuration:
* = LLDP is inactive on this port because it is a mirror analyser port
Notification Abbreviations:
RC = LLDP Remote Tables Change
TLV Abbreviations:
Base:
Pd = Port Description
Sd = System Description
Ma = Management Address
802.1: Pv = Port VLAN ID
Vn = VLAN Name
802.3: Mp = MAC/PHY Config/Status
La = Link Aggregation
MED:
Mc = LLDP-MED Capabilities
Lo = Location Identification
Port
Rx/Tx
Notif
-------------------------------------------------------------------------------
1.0.1
Rx Tx
RC --
*1.0.2
-- Tx
RC --
1.0.3
Rx Tx
RC --
1.0.4
-- --
RC --
1.0.5
Rx Tx
RC TC
1.0.6
Rx Tx
RC TC
613-50137-01 Rev A
Parameter
Description
<port-list>
The ports for which the LLDP configuration settings are to be shown.
show lldp interface port1.0.1-1.0.6
show lldp interface
Management Addr
192.168.100.123
192.168.100.123
192.168.100.123
192.168.100.123
192.168.100.123
192.168.100.123
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
TC = LLDP-MED Topology Change
Sn = System Name
Sc = System Capabilities
Pp = Port And Protocol VLAN ID
Pi = Protocol Identity
Po = Power Via MDI (PoE)
Mf = Maximum Frame Size
Np = Network Policy
Pe = Extended PoE
Optional TLVs Enabled for Tx
Base
802.1
PdSnSdScMa -------- -------- McNpLoPe--
PdSnSdScMa -------- -------- McNpLoPe--
Pd--SdScMa PvPpVnPi -------- McNpLoPe--
PdSnSd--Ma -------- -------- McNpLoPe--
PdSnSdScMa PvPpVnPi -------- McNpLoPe--
Pd----ScMa -------- -------- McNpLoPe--
In = Inventory
802.3
MED
1554
Advertisement
Troubleshooting
