SNMP C
OMMANDS
SHOW DEBUGGING SNMP
show debugging snmp
Overview
This command displays whether SNMP debugging is enabled or disabled.
show debugging snmp
Syntax
Mode
User Exec and Privileged Exec
Example
To display the status of SNMP debugging, use the command:
awplus#
Output
Figure 41-2: Example output from the show debugging snmp command
Related
debug snmp
Commands
613-50137-01 Rev A
show debugging snmp
Snmp (SMUX) debugging status:
Snmp debugging is on
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1481