Time (Trigger) - Centrecom FS980M/9 Command Reference Manual

T C
RIGGER OMMANDS
( )
TIME TRIGGER

time (trigger)

Overview This command specifies the time of day when the trigger is permitted to activate.
The after parameter specifies the start of a time period that extends to midnight
during which trigger may activate. By default the value of this parameter is
00:00:00 (am); that is, the trigger may activate at any time. The before parameter
specifies the end of a time period beginning at midnight during which the trigger
may activate. By default the value of this parameter is 23:59:59; that is, the trigger
may activate at any time. If the value specified for before is later than the value
specified for after, a time period from " after " to " before " is defined, during which
the trigger may activate. This command is not applicable to time triggers ( type
time).
The following figure illustrates how the before and after parameters operate.
time {[after <hh:mm:ss>] [before <hh:mm:ss>]}
Syntax
Mode Trigger Configuration
613-50137-01 Rev A
Parameter
after<hh:mm:ss>
before<hh:mm:ss>
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The earliest time of day when the trigger may be activated.
The latest time of day when the trigger may be activated.
1661