Ntp Commands - Centrecom FS980M/9 Command Reference Manual

40
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the Network Time Protocol (NTP). For more information, see the
Overview and Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A

NTP Commands

"ntp access-group" on page 1451
"ntp authenticate" on page 1452
"ntp authentication-key" on page 1453
"ntp broadcastdelay" on page 1454
"ntp discard" on page 1455
"ntp master" on page 1456
"ntp peer" on page 1457
"ntp restrict" on page 1459
"ntp server" on page 1461
"ntp source" on page 1463
"ntp trusted-key" on page 1465
"show counter ntp (deprecated)" on page 1466
"show ntp associations" on page 1467
"show ntp counters" on page 1469
"show ntp counters associations" on page 1471
"show ntp status" on page 1473
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Guide.
NTP Feature
"Getting Started
Guide.
1450