Snmp-Server Location - Centrecom FS980M/9 Command Reference Manual

SNMP C
OMMANDS
-
SNMP SERVER LOCATION

snmp-server location

Overview This command sets the location of the system. The location is:
•
•
The no variant of this command removes the configured location from the system.
snmp-server location <location-name>
Syntax
no snmp-server location
Mode Global Configuration
Example To set the location to "server room 523", use the following commands:
awplus#
awplus(config)#
Related show snmp-server
Commands
show system
snmp-server contact
613-50137-01 Rev A
displayed in the output of the
stored in the MIB object sysLocation
Parameter
<location-name>
configure terminal
snmp-server location server room 523
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
show system
Description
The location of the system, from 0 to 255 characters long. Valid
characters are any printable character and spaces.
command
1506