Advertisement
LLDP C
OMMANDS
-
LOCATION COORD
LOCATION IDENTIFIER
location coord-location identifier
Overview
Use this command to enter Coordinate Location Configuration mode for this
coordinate location.
Use the no variant of this command to delete a coordinate location. This also
removes the location from any ports it has been assigned to.
Syntax
location coord-location identifier <coord-loc-id>
no location coord-location identifier <coord-loc-id>
Default
By default there are no coordinate locations.
Mode
Global Configuration
Usage
Up to 400 locations can be configured on the switch for each type of location
information, up to a total of 1200 locations.
To configure this coordinate location, use the
configuration
ports, so that it can be advertised in TLVs from those ports, use the
coord-location-id
Examples
To enter Coordinate Location Configuration mode to configure the coordinate
location with ID 1, use the commands:
awplus#
awplus(config)#
awplus(config-coord)#
To delete coordinate location 1, use the commands:
awplus#
awplus(config)#
Related
location coord-location-id
Commands
location coord-location configuration
show lldp local-info
show location
613-50137-01 Rev A
Parameter
<coord-loc-id>
command. To associate this coordinate location with particular
command.
configure terminal
location coord-location identifier 1
configure terminal
no location coord-location identifier 1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
A unique coordinate location identifier, in the range 1 to
4095.
location coord-location
location
1546
Advertisement
Troubleshooting
