Show Atmf Provision Nodes - Centrecom FS980M/9 Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

SHOW ATMF PROVISION NODES

show atmf provision nodes
Overview This command displays information about each provisioned node with details
about date and time of creation, boot and configuration files available in the
backup, and license files present in the provisioned backup. This includes nodes
that have joined the network but are yet to run their first backup.
This command can only be run on AMF master and controller nodes.
show atmf provision nodes
Syntax
Mode Privileged Exec
Usage This command will only work if provisioned nodes have already been set up.
Otherwise, an error message is shown when the command is run.
Example To show the details of all the provisioned nodes in the backup use the command:
NodeName#
Figure 38-17: Sample output from the show atmf provision nodes command

device1#show atmf provision nodes 

ATMF Provisioned Node Information: 

Backup Media .............: SD (Total 3827.0MB, Free 3481.1MB)

Node Name
Date& Time
Provision Path

Boot configuration :
Current boot image
Backup boot image
Default boot config
Current boot config
Backup boot config

Software Licenses :
Repository file
Certificate file
Related atmf provision node create
commands
atmf provision node clone
atmf provision node configure boot config
atmf provision node configure boot system
show atmf backup
613-50137-01 Rev A
™ (AMF) C
RAMEWORK OMMANDS
show atmf provision nodes
: device2
: 06-Oct-2016 & 23:25:44
: card:/atmf/provision_nodes
: x510-5.4.6-1.4.rel (file exists)
: x510-5.4.6-1.3.rel (file exists)
: flash:/default.cfg (file exists)
: flash:/abc.cfg (file exists)
: flash:/xyz.cfg (file exists)
: ./.configs/.sw_v2.lic
: ./.configs/.swfeature.lic
: card:/atmf/nodes/awplus1/flash/.atmf-lic-cert
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1420