Rmon Collection Stats - Centrecom FS980M/9 Command Reference Manual

RMON C
OMMANDS

RMON COLLECTION STATS

rmon collection stats
Overview Use this command to enable the collection of RMON statistics on a switch port, and
assign an index number by which to access these collected statistics.
Use the no variant of this command to stop collecting RMON statistics on this
switch port.
NOTE
collected.
rmon collection stats <collection-index> [owner <owner>]
Syntax
no rmon collection stats <collection-index>
Default RMON statistics are not enabled by default.
Mode Interface Configuration
Example To enable the collection of RMON statistics with a statistics index of 200, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
To to stop collecting RMON statistics, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
613-50137-01 Rev A
: Only statistics for switch port interfaces, not for VLAN interfaces, can be
Parameter
<collection-index>
owner <owner>
configure terminal
interface port1.0.2
configure terminal
interface port1.0.2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
<1-65535> Give this collection of statistics an index
number to uniquely identify it. This is the index to use to
access the statistics collected for this switch port.
An arbitrary owner name to identify this statistics
collection entry.
rmon collection stats 200 owner myrtle
no rmon collection stats 200
1586