Show Ssh Server Deny-Users - Centrecom FS980M/9 Command Reference Manual

S S (SSH) C
ECURE HELL OMMANDS
-
SHOW SSH SERVER DENY USERS

show ssh server deny-users

Overview This command displays the user entries in the deny list of the SSH server. The user
in the deny list is rejected to access the SSH server. If a user is not included in the
access list of the SSH server, the user is also rejected.
show ssh server deny-users
Syntax
Mode User Exec, Privileged Exec and Global Configuration
Example To display the user entries in the deny list of the SSH server, use the command:
awplus#
Output Figure 45-10: Example output from the show ssh server deny-users command
Table 10: Parameters in the output of the show ssh server deny-user command
Related ssh server allow-users
Commands
ssh server deny-users
613-50137-01 Rev A
show ssh server deny-users
Username Remote Hostname (pattern)
----------------- --------------------------------
john *.b-company.com
manager 192.168.2.*
Parameter Description
Username
The user that this rule applies to.
Remote
IP address or hostname pattern of the remote client. The user is
Hostname
denied requests from a host that matches this pattern. If no
(pattern)
hostname is specified, the user is denied from all hosts.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1624