Advertisement
RRP S
C
NOOPING
OMMANDS
IP RRP SNOOPING
ip rrp snooping
Overview
Use this command to enable RRP snooping.
Use the no variant of this command to disable RRP Snooping.
Syntax
ip rrp snooping
no ip rrp snooping
Default
The default is disabled.
Mode
Global Configuration
Usage
Use this command to enable the RRP Snooping feature. You cannot use RRP
Snooping at the same time as the following features:
•
•
•
•
•
Examples
The example below shows you how to enable RRP Snooping.
awplus#
awplus(config)#
Related
show ip rrp snooping
Commands
613-50137-01 Rev A
STP, RSTP, or MSTP, except for edge ports. RSTP is enabled by default. To
disable it, use the command
Port security (the command switchport port-security)
Port authentication
EPSR
Port mirroring
configure terminal
ip rrp snooping
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
spanning-tree enable
on page 486.
1279
Advertisement
Troubleshooting
