Advertisement
SNMP C
OMMANDS
-
SNMP
SERVER VIEW
snmp-server view
Overview
Use this command to create an SNMP view that specifies a sub-tree of the MIB.
Further sub-trees can then be added by specifying a new OID to an existing view.
Views can be used in SNMP communities or groups to control the remote
manager's access.
NOTE
decimal points.
The no variant of this command removes the specified view on the device. The
view must already exist.
snmp-server view <view-name> <mib-name> {included|excluded}
Syntax
no snmp-server view <view-name>
Mode
Global Configuration
Examples
The following command creates a view called "loc" that includes the system
location MIB sub-tree.
awplus(config)#
To remove the view "loc" use the following command
awplus(config)#
Related
show snmp-server view
Commands
snmp-server community
613-50137-01 Rev A
: The object identifier must be specified in a sequence of integers separated by
Parameter
Description
<view-name> SNMP server view name.
The view name is a string up to 20 characters long and is case
sensitive.
<mib-name>
Object identifier of the MIB.
included
Include this OID in the view.
excluded
Exclude this OID in the view.
snmp-server view loc 1.3.6.1.2.1.1.6.0 included
no snmp-server view loc
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1512
Advertisement
Troubleshooting
