Ip Dhcp Snooping Trust - Centrecom FS980M/9 Command Reference Manual

DHCP S C
NOOPING OMMANDS

IP DHCP SNOOPING TRUST

ip dhcp snooping trust
Overview Use this command to set the ports to be DHCP snooping trusted ports.
Use the no variant of this command to return the ports to their default as untrusted
ports.
Syntax ip dhcp snooping trust
no ip dhcp snooping trust
Default All ports are untrusted by default.
Mode Interface Configuration (port)
Usage Typically, ports connecting the switch to trusted elements in the network (towards
the core) are set as trusted ports, while ports connecting untrusted network
elements are set as untrusted. Configure ports connected to DHCP servers as
trusted ports.
Example To set switch ports 1.0.1 and 1.0.2 to be trusted ports, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show ip dhcp snooping interface
Commands
613-50137-01 Rev A
configure terminal
interface port1.0.1-port1.0.2
ip dhcp snooping trust
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1182