Advertisement
E
P
S
THERNET
ROTECTION
WITCHED
SHOW EPSR
show epsr
Overview
This command displays information about all EPSR instances.
show epsr
Syntax
Mode
User Exec and Privileged Exec
Example
To show the current settings of all EPSR instances, use the command:
awplus#
Output:
The following examples show the output display for a non-superloop topology
non-superloop
network.
topology
Table 1: Example output from the show epsr command run on a transit node
613-50137-01 Rev A
R
(EPSR
™) C
ING
ING
OMMANDS
show epsr
EPSR Information
------------------------------------------------------------
Name .......................... test2
Mode .......................... Transit
Status ........................ Enabled
State ......................... Links-Up
Control Vlan .................. 2
Data VLAN(s) .................. 10
Interface Mode ................ Ports Only
First Port .................... port1.0.1
First Port Status ............. Down
First Port Direction .......... Unknown
Second Port ................... port1.0.2
Second Port Status ............ Down
Second Port Direction ......... Unknown
Trap .......................... Enabled
Master Node ................... Unknown
Enhanced Recovery ............. Disabled
------------------------------------------------------------
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
1266
Advertisement
Troubleshooting
