Download Print this page

Centrecom FS980M/9 Command Reference Manual page 823

Fs980m series fast ethernet managed access switches reference for alliedware plus version 5.4.6-2.x

Advertisement

IP
4 S
A
C
V
OFTWARE
CCESS
ONTROL
(
-
TCP UDP
ACCESS
LIST EXTENDED
(access-list extended TCP UDP filter)
Overview
Use this ACL filter to add a new TCP or UDP filter entry to the current extended
access-list. If the sequence number is specified, the new filter is inserted at the
specified location. Otherwise, the new filter is added at the end of the access-list.
The no variant of this command removes a TCP or UDP filter entry from the current
extended access-list. You can specify the TCP or UDP filter entry for removal by
entering either its sequence number (e.g. no 10), or by entering its TCP or UDP
filter profile without specifying its sequence number.
Note that the sequence number can be found by running the
Software ACLs)
[<sequence-number>] {deny|permit} {tcp|udp} <source> eq
Syntax [tcp|udp]
<sourceport>
no [<sequence-number>] {deny|permit} {tcp|udp} <source> eq
<sourceport>
no [<sequence-number>]
613-50137-01 Rev A
L
(ACL) C
IST
OMMANDS
)
FILTER
command.
<destination> eq <destport> [log]
<destination> eq <destport> [log]
Parameter
Description
<sequence-
<1-65535>
number>
The sequence number for the filter entry of the selected access
control list.
deny
Access-list rejects packets that match the source and destination
filtering specified with this command.
permit
Access-list permits packets that match the source and destination
filtering specified with this command.
tcp
The access-list matches only TCP packets.
udp
The access-list matches only UDP packets.
<source>
The source address of the packets. You can specify a single host, a
subnet, or all sources. The following are the valid formats for
specifying the source:
<ip-addr>/
<prefix>
any
<sourceport>
The source port number, specified as an integer between 0 and
65535.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
show access-list (IPv4
An IPv4 address, followed by a
forward slash, then the prefix length.
This matches any source IP address
within the specified subnet.
Matches any source IP address.
823

Advertisement

loading