Advertisement
T
C
RIGGER
OMMANDS
(
)
ACTIVE
TRIGGER
active (trigger)
Overview
This command enables a trigger. This allows the trigger to activate when its trigger
conditions are met.
The no variant of this command disables a trigger. While in this state the trigger
cannot activate when its trigger conditions are met.
Syntax
active
no active
Mode
Trigger Configuration
Usage
Configure a trigger first before you use this command to activate it.
For information about configuring a trigger, see the
Configuration
Examples
To enable trigger 172, so that it can activate when its trigger conditions are met,
use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
To disable trigger 182, preventing it from activating when its trigger conditions are
met, use the commands:
awplus#
awplus(config)#
awplus(config-trigger)#
Related
show trigger
Commands
trigger
613-50137-01 Rev A
Guide.
configure terminal
trigger 172
active
configure terminal
trigger 182
no active
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Triggers Feature Overview and
1645
Advertisement
Troubleshooting
