Auth-Mac Reauth-Relearning - Centrecom FS980M/9 Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH MAC REAUTH RELEARNING

auth-mac reauth-relearning

Overview This command sets the MAC address learning of the supplicant (client device) to
re-learning for re-authentication on the interface specified in the Interface
command mode.
Use the no variant of this command to disable the auth-mac re-learning option.
Syntax auth-mac reauth-relearning
no auth-mac reauth-relearning
Default Re-learning for port authentication is disabled by default.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
To enable the re-authentication re-learning feature on interface port1.0.2, use
Examples
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable the re-authentication re-learning feature on interface port1.0.2, use
the following commands:
awplus#
awplus(config)#
awpl us(config-if)#
To enable the re-authentication re-learning feature on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To disable the re-authentication re-learning feature on authentication profile
'student', use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Related auth profile (Global Configuration)
Commands
show auth
show auth interface
show running-config
613-50137-01 Rev A
configure terminal
interface port1.0.2
auth-mac reauth-relearning
configure terminal
interface port1.0.2
no auth-mac reauth-relearning
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
auth-mac reauth-relearning
no auth-mac reauth-relearning
991