Centrecom FS980M/9 Command Reference Manual page 863

Q S C
O OMMANDS
-
MATCH ETH FORMAT PROTOCOL
Mode Class Map Configuration
To set the eth-format to ethii-tagged and the protocol to 0800 (IP) for class-map
Examples
cmap1, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
0800
awplus#
awplus(config-cmap)#
To remove the eth-format and the protocol from the class-map cmap1, use the
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
613-50137-01 Rev A
Parameter
ethertalk-2
ethertalk-2-aarp Protocol Number 80F3 (enter the parameter name or its
ipx-snap
ipx-802dot3
ip
ipx
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
Protocol Number 809B (enter the parameter name or its
number).
number).
Protocol Number 8137 (enter the parameter name or its
number).
Protocol Number FFFF (enter the parameter name or its
number).
Protocol Number 0800 (enter the parameter name or its
number).
Protocol Number 8137 (enter the parameter name or its
number).
match eth-format ethii-tagged protocol
match eth-format ethii-tagged protocol ip
no match eth-format protocol
863