802.1X C
OMMANDS
1
SHOW DOT
X
show dot1x
Overview
This command shows authentication information for dot1x (802.1X) port
authentication.
If you specify the optional all parameter then this command also displays all
authentication information for each port available on the switch.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show dot1x [all]
Syntax
Mode
Privileged Exec
awplus#
Example
Table 1: Example output from the show dot1x command
awplus# show dot1x all
802.1X Port-Based Authentication Enabled
RADIUS server address: 150.87.18.89:1812
Next radius message id: 5
RADIUS client address: not configured
Authentication info for interface port1.0.6
portEnabled: true - portControl: Auto
portStatus: Authorized
reAuthenticate: disabled
reAuthPeriod: 3600
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
PAE: connectTimeout: 30
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in
KT: keyTxEnabled: false
critical: disabled
guestVlan: disabled
dynamicVlanCreation: single-dynamic-vlan
assignFailActionRule: deny
hostMode: multi-supplicant
maxSupplicant:
256
613-50137-01 Rev A
Parameter
Description
all
Displays all authentication information for each port available on the
switch.
show dot1x all
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
"Getting Started
Guide.
924