Auth-Web-Server Dhcp Ipaddress - Centrecom FS980M/9 Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER DHCP IPADDRESS

auth-web-server dhcp ipaddress

Overview Use this command to assign an IP address and enable the DHCP service on the
Web-Authentication server for supplicants (client devices).
Use the no variant of this command to remove an IP address and disable the DHCP
service on the Web-Authentication server for supplicants.
Syntax auth-web-server dhcp ipaddress <ip-address/prefix-length>
no auth-web-server dhcp ipaddress
Default No IP address for the Web-Authentication server is set by default.
Mode Global Configuration
Usage See the
for information about:
•
•
You cannot use the IPv4 address assigned to the device's interface as the
Web-Authentication server address.
To assign the IP address 10.0.0.1 to the Web-Authentication server, use the
Examples
following commands:
awplus#
awplus(config)#
To remove an IP address on the Web-Authentication server, use the following
commands:
awplus#
awplus(config)#
Validation show running-config
Commands
Related show auth-web-server
Commands
auth-web-server dhcp lease
613-50137-01 Rev A
Parameter
<ip-addr/
prefix-length>
AAA and Port Authentication Feature Overview and Configuration Guide
using DHCP with web authentication, and
restrictions regarding combinations of authentication enhancements
working together
configure terminal
auth-web-server dhcp ipaddress 10.0.0.1/8
configure terminal
no auth-web-server dhcp ipaddress
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The IPv4 address and prefix length assigned for the DHCP
service on the Web-Authentication server for supplicants.
1002