Type Stack Member - Centrecom FS980M/9 Command Reference Manual

T C
RIGGER OMMANDS

TYPE STACK MEMBER

type stack member
Overview This command (configured to the stack) initiates the action of a pre-configured
trigger to occur when a device either joins or leaves the stack.
type stack member {join|leave}
Syntax
Mode Trigger Configuration
To configure a pre-configured trigger number 86 to activate when a new device
Example
joins the stack.
Note that the number 86 has no particular significance: you can assign any
(previously created) numbered trigger.
awplus#
awplus(config)#
awplus(config-trigger)#
Related trigger
Commands
type stack master-fail
type stack link
613-50137-01 Rev A
Parameter Description
join
Neighbor join event
leave
Neighbor leave event
configure terminal
trigger 86
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
type stack member join
1678