Aaa Accounting Dot1X - Centrecom FS980M/9 Command Reference Manual

AAA C
OMMANDS
1
AAA ACCOUNTING DOT X

aaa accounting dot1x

Overview This command configures the default accounting method list for IEEE
802.1X-based authentication. The default accounting method list specifies what
type of accounting messages are sent and which RADIUS servers the accounting
messages are sent to. The default accounting method list is automatically applied
to interfaces with IEEE 802.1X-based authentication enabled.
Use the no variant of this command to disable AAA accounting for 802.1X-based
authentication globally.
aaa accounting dot1x default {start-stop|stop-only|none} group
Syntax
{<group-name>|radius}
no aaa accounting dot1x default
Default RADIUS accounting for 802.1X-based authentication is disabled by default (there
is no default server set by default).
Mode Global Configuration
Usage There are two ways to define servers where RADIUS accounting messages will be
sent:
•
•
The accounting event to send to the RADIUS server is configured by the following
options:
•
•
•
613-50137-01 Rev A
Parameter Description
default
Configure the default accounting method list
start-stop
Sends a start accounting message at the beginning of the session
and a stop accounting message at the end of the session.
stop-only
Only sends a stop accounting message at the end of the session.
none
No accounting record sent.
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
group radius: use all RADIUS servers configured by
command.
group <group-name>: use the specified RADIUS server group configured
with the aaa group server
start-stop: sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
stop-only: sends a stop accounting message at the end of a session.
none: disables accounting.
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
command.
radius-server host
1058