Advertisement
A
T
M
F
LLIED
ELESIS
ANAGEMENT
ATMF MTU
atmf mtu
Overview
This command configures the AMF network Maximum Transmission Unit (MTU).
The MTU value will be applied to the AMF Management VLAN, the AMF Domain
VLAN and AMF Area links.
Use the no variant of this command to restore the default MTU.
Syntax
atmf mtu <1300-1442>
no atmf mtu
Default
1300
Mode
Global Configuration
Usage
The default value of 1300 will work for all AMF networks (including those that
involve virtual links over IPsec tunnels). If there are virtual links over IPsec tunnels
anywhere in the AMF network, we recommend not changing this default. If there
are no virtual links over IPsec tunnels, then this AMF MTU value may be increased
for network efficiency.
Example
To change the ATMF network MTU to 1442, use the command:
awplus(config)#
Related
show atmf detail
Commands
613-50137-01 Rev A
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
<1300-1442>
atmf mtu 1442
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Description
The value of the maximum transmission unit for the
AMF network, which sets the maximum size of all AMF
packets generated from the device.
1325
Advertisement
Troubleshooting
